Filter
Top Products
15
Basic Functions
Zoom/Focus
Mode Power On
Power Off
1)
IFC
2)
Initializing
3)
Zoom Direct Focus Direct AF ON
During displaying
Memory Recall
Command a still image
CAM_Zoom Tele/Wide/Stop ××××aa××
CAM_Zoom Direct ×××aaa××
D-Zoom Limit ××××aa××
CAM_Focus Far/Near/Stop ×××a ××××
CAM_Focus Direct ×××aa×××
CAM_Focus Mode (Auto/Manual) ×××a × a ××
CAM_Focus One Push Trigger ×××a ××××
CAM_Focus Infinity ×××a × a ××
CAM_Focus Near Limit ×××a × a ××
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the lens is initialized, u
ntil the video signal is output. Or the period from the time the CAM Power ON
command is sent, until Completion is returned.
White Balance
Mode Power On
Power Off
1)
IFC
2)
Initializing
3)
White balance mode
During displaying
Memory Recall
Command Auto Indoor Outdoor One Push Manual a still image
CAM_WB Auto/Indoor/Outdoor/
OnePUshWB/Manual
×××aaaaa ××
CAM_WB One Push Trigger ××××××a
4)
×× ×
CAM_WB R(B) Gain
Reset/Up/Down/Direct
×××××××a ××
1) DC power is being supplied, but the camera has been turned off by a VISCA command.
2) The period from the time IF Clear is sent, until the Reply Packet is returned.
3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the lens is initialized, u
ntil the video signal is output. Or the period from the time the CAM Power ON
command is sent, until Completion is returned.
4) Commands are ignored during a One Push AWB operation.