Filter
Top Products
103
Troubleshooting
DCR-HC32/HC42 2-584-906-11(1)
PictBridge compliant printer
Check the connected device.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
Connect the camcorder to a
PictBridge compatible printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
Error-Cancel the task.
• Check the printer.
Cannot print. Check the printer.
• Switch off the printer and switch it on
again, then disconnect the USB cable
and reconnect it.
Flash
Charging… Cannot record still
images.
• You are trying to record a still image
while charging the flash (optional).
Others
Cannot record due to copyright
protection (p. 106).
Cannot add audio. Disconnect the
i.LINK cable (p. 63).
Not recorded in SP mode. Cannot
add audio (p. 63).
Not recorded in 12-bit audio. Cannot
add audio (p. 63).
Cannot add audio on the blank
portion of a tape (p. 63).
Cannot add audio (p. 63).
Dirty video head. Use a cleaning
cassette (p. 112).
Cannot start Easy Handycam
Cannot cancel Easy Handycam (p.
20).
USB is invalid in this mode during
Easy Handycam
• You can select [STD-USB] when you
set the POWER switch to PLAY/EDIT
during Easy Handycam operation, but
you cannot select [PictBridge] or [USB
STREAM]. (The message disappears
when you touch .)
HDV recorded tape. Cannot
playback.
•
Your camcorder cannot play back this
format. Play back the tape with the
equipment that recorded it.
HDV recorded tape. Cannot add
audio.
• Your camcorder does not allow you
to add audio on a section of a tape
recorded in HDV format.
Continued