Filter
Top Products
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Maintenance and precautions > About handling of your camcorder > On moisture
condensation
On moisture condensation
If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside
your camcorder. This may cause a malfunction to your camcorder.
If moisture condensation has occurred
Leave your camcorder for about 1 hour without turning it on.
Note on moisture condensation
Moisture may condense when you bring your camcorder from a cold place into a warm place (or vice
versa) or when you use your camcorder in a humid place as follows:
You bring your camcorder from a ski slope into a place warmed up by a heating device.
You bring your camcorder from an air conditioned car or room into a hot place outside.
You use your camcorder after a squall or a rain.
You use your camcorder in a hot and humid place.
How to prevent moisture condensation
When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic
bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached
the surrounding temperature (after about 1 hour).
Back to top
Copyright 2012 Sony Corporation
233