Filter
Top Products
You can change the on-screen displays to show messages in a specified language.
Select
[Setup] [ General Settings] [Language Setting] a desired language.
To turn off the power
Close the LCD screen or press the POWER button.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder ( ), and then adjust the angle ( ).
Notes
The recording date, time and condition, and coordinates (HDR-
CX260V/CX580V/PJ260V/PJ580V/PJ600V/XR260V) are recorded automatically on the recording
media. They are not displayed during recording. However, you can check them as [Data Code]
during playback. To display them, select
[Setup] [ Playback Settings] [Data
Code]
[Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto
Area ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending
on the country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto
Area ADJ] to [Off] (HDR-CX260V/CX580V/PJ260V/PJ580V/PJ600V/XR260V).
Related topics
[Power On By LCD]
To set the date and time again: [Date & Time Setting]
To calibrate the touch panel: [Calibration]
Back to top
Copyright 2012 Sony Corporation
45