Filter
Top Products
36
US
Recording
information on your
location
(GPS) (HDR-
GW77V)
When you set [GPS Setting] to [On] (the
default setting), the GPS triangulating
icon will appear on the screen and the
camcorder will start searching for GPS
satellite signals. The icon displayed will
vary according to the intensity of the signal
received. The GPS function is available
when
, or are displayed.
The following features are available if you
use the GPS (Global Positioning System)
function.
R
ecording location information on
m
ovies or photos ([On] is the default
setting.)
P
laying movies and photos by searching
f
or them from a map (Map View, p. 33)
Displaying a map of your current
lo
cation
If you do not want to record location
information
Select [Setup] [ General
Settings] [GPS Setting] [Off].
Notes
It may take a while before the camcorder starts
triangulating.
Use the GPS function outdoors and in open
areas, as the radio signals can best be received
in such areas.
The map always displays the north at the top.
Playing images on a
TV
Connect the camcorder to a TV using the
HDMI cable.
1
Switch the input on the TV to
HDMI IN.
2
Connect the camcorder to a TV
using the HDMI cable.
3
Play a movie or a photo on the
camcorder (p. 31).
Notes
Refer to the instruction manuals of the TV as
well.
Connect the camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor and the
USB cable (p. 20).
When movies are recorded with standard
definition image quality (STD), they are played
back in standard definition image quality (STD)
even on a high definition TV.
HDMI Cable (supplied)
Signal flow