![](http://pdfasset.owneriq.net/6/ed/6ed25523-1457-4ae8-8466-d70a24ba44c3/6ed25523-1457-4ae8-8466-d70a24ba44c3-bg2a.png)
GB
42
5 Make sure that the built-in flash and flash unit are fully
charged.
• “ ” is lit in the viewfinder when the built-in flash is fully charged.
• When the flash unit is fully charged in the wireless flash mode, the AF
illuminator on the front blinks, and the TEST button is lit in amber.
6 Use test flash to check the flash.
• The test flash method differs depending on the camera used. For details,
refer the operation instructions of your camera.
• If the test flash does not work, change the position of the camera, flash or
subject.
7 Check again that the built-in flash and the flash unit are
fully charged, and press the shutter button to take the
photo.