Filter
Top Products
GB
14
Preparing the camera
A Battery/memory card cover (16,
23)
B Access lamp (24)
C Memory card insertion slot (23)
D Battery compartment (16)
E Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
• Make sure that the cord is not
pinched when you close the
cover.
F Tripod socket hole
• Use a tripod with a screw length
of less than 5.5 mm (7/32 inch).
You will be unable to firmly
secure the camera to tripods
using screws longer than 5.5 mm
(7/32 inch), and may damage the
camera.
G Speaker
x
Lens
See page 96 on the specifications of
the lenses.
E PZ 16 – 50 mm F3.5-5.6
OSS (supplied with
NEX-6L/NEX-6Y)
A Zooming/Focusing ring
B Zooming lever
C Mounting index
D Lens contacts
1)
1)
Do not touch this part directly.