Filter
Top Products
GB
20
Preparing the camera
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). For details, refer to the operating manual supplied with the Mount
Adaptor.
x
Removing the lens
• When changing the lens, if dust or debris gets inside the camera and adheres to the
surface of the image sensor (the part that acts as the film), it may appear as dark
spots on the image, depending on the shooting environment. The camera vibrates
slightly when it is turned off, due to the anti-dust function, to prevent dust from
adhering to the image sensor. However, attach or remove the lens quickly
somewhere away from dusty locations.
• Do not leave the camera with the lens removed.
• When you want to use body caps or rear lens caps, please purchase ALC-B1EM
(Body cap) or ALC-R1EM (Rear lens cap) (sold separately).
3
While pushing the lens lightly
toward the camera, turn the
lens clockwise until it clicks
into the locked position.
• Be sure to put the lens on straight.
Notes
1
Press the lens release button
all the way in and turn the lens
counterclockwise until it
stops.
Lens release button
Notes