Sony NTSC/PAL Security Camera User Manual


 
9
All-in-one IP network color camera with integrated pan/tilt/zoom
MPEG-4 and JPEG compression
Remote monitoring from PCs using Microsoft Internet Explorer or Sony's IMZ-RS
series Intelligent Monitoring Software.
100Base-TX/10Base-T Ethernet
Easy GUI based operations
High-frame rate of up to 30 fps at 320 x 240 sized image
Six selectable image sizes
External microphone input and speaker output for bidirectional audio capability
Pan/Tilt operation- 120 degree Pan range/ 75 degree Tilt range
Optical 3x zoom capability
Adaptive rate control function provides smooth video over network by adjusting
compression ratio and frame rate automatically
Multicasting capability
Simultaneous access up to 20(JPEG mode)/10(MPEG-4 mode) users
Networking security features - IP filtering/Password protection
Motion detection
*7
and alarm trigger function
Pre-/Post-Alarm image storage
Image transfer using FTP or SMTP
Compact Flash™ type card slot- support for optional SNCA-CFW1 Wireless Card
or Compact Flash card
Wall-mounted or ceiling-mounted installation
Analog composite video output for local
analog viewing or recording
Can be used in outdoor environment with
the optional SNCA-HP5 Housing Kit
*7
Motion detection function can be used when a monitoring image is set to a MPEG-4.
SNC-P5 NEW
SNC-P5 Rear
Fixed All-in-one IP network color camera
MPEG-4 and JPEG compression
Compact and slim design
Remote monitoring from PCs using Microsoft Internet Explorer or Sony's IMZ-RS
series Intelligent Monitoring Software.
100Base-TX/10Base-T Ethernet
Easy GUI based operations
High-frame rate of up to 30 fps at 320 x 240 sized image
Six selectable image sizes
External microphone input and speaker output for bidirectional audio capability
Adaptive rate control function provides smooth video over network by adjusting
compression ratio and frame rate automatically
Multicasting capability
Simultaneous access up to 20(JPEG mode)/10(MPEG-4 mode) users
Networking security features - IP filtering/Password protection
Motion detection
*8
and alarm trigger function
Pre-/Post-Alarm image storage
Image transfer using FTP or SMTP
Desk-top, wall-mounted, or ceiling-mounted
installation
Analog composite video output for local
analog viewing or recording
*8
Motion detection function can be used when a monitoring image is set to a MPEG-4.
SNC-P1 NEW
SNC-P1 Rear
MK10187V1.qxd 05.2.25 5:49 PM Page 9