Sony NTSC/PAL Security Camera User Manual


 
20
Ideal for video monitoring over networks (converts analog camera signals to
TCP/IP)
Camera images can be remotely monitored and controlled over existing
networks (LAN/WAN)
Built-in web server provides user-friendly interface for easy monitoring and
control from networked PCs running a Web browser
The SNT-V504 supports up to four video surveillance cameras and the SNT-V501
supports one camera
Supports a high frame rate of up to 30 fps
*17
at a high-resolution of 704 x 480
(NTSC)/704 x 576 (PAL) to provide clear and smooth moving images
Easy to install, expand, and maintain
Multi-user access and password protection
Video Out for local monitoring
PC Card Slot
*18
to increase storage capacity with flash memory or to configure
in a wireless network with an IEEE 802.11b-compliant wireless PC card
RS-232C/485 Interface for camera control including Pan/Tilt/Zoom control
Transparency function allows control of external equipment from a PC on the
network
Built-in activity detection function to trigger an alarm
Alarm image buffering allows for storage of pre-alarm and post-alarm images
When an alarm occurs, a JPEG file showing the alarm event can be sent to pre-
determined e-mail addresses or to a server
Alternate viewing modes with the SNT-V504, including single screen and two
types of four-division split screens
"Tour" feature for scanning pre-assigned patterns
Viewing from a PDA
*19
*17
Supports a maximum of 25 fps with PAL camera systems. In order to achieve the maximum
frame rate, a client PC with adequate processing power and an adequate network environment
are required.
*18
Please contact your local Sony office or authorized dealer for information on memory and
wireless cards compatible with the SNT-V501/V504.
*19
Compatible with PDAs running Microsoft
®
Pocket PC
®
. Requires the Jeode plug-in Ver. 1.9.1.
SNT-V504/V501 NEW
VIDEO NETWORK STATION
SNT-V504 Rear Panel
SNT-V504
SNT-V501
SNT-V501 Rear Panel
MK10187V1.qxd 05.2.25 5:50 PM Page 20