Filter
Top Products
Chapter 7 Menu Displays and Detailed Settings
125
7-3 Adjustments and Settings from Menus
4
Set the WHITE BAL switch to the position
corresponding to the desired channel (A or B).
Note
If the WHITE BAL switch is not set to A or B when
you operate the camcorder, the adjustment value will
not be reflected in the output signal.
5
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to change the setting, and press
the MENU knob.
The z mark changes to a b mark and the ? mark
changes to a z mark.
To set other items, go back to step 3.
To set the other white balance channel, go back to step
2.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
7-3-5 Assigning Functions to
ASSIGN 1/2/3/4 Switches
You can assign the desired function to any of the ASSIGN
1/2/3/4 switches and the TURBO GAIN button.
Proceed as follows.
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the FUNCTION 1 page
appears, then press the MENU knob to select to page.
3
Turn the MENU knob to move the b mark to the item
corresponding to the switch to which you want to
assign the function, and press the MENU knob.
The corresponding ASSIGN SW SEL window
appears.
Item Description
OFFSET WHITE
<A>
Turns the setting of the offset for
channel A ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL <A> When OFFSET WHITE <A> is ON,
sets the offset for the white balance of
channel A, using the color
temperature. Adjust the value while
looking at the real image because
error tends to be bigger for adjustment
of high color temperature.
COLOR FINE <A> Adjusts the value more precisely if the
adjustment by WARM-COOL <A> is
not satisfactry.
OFFSET WHITE
<B>
Turns the setting of the offset for
channel B ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL <B> Sets the offset for the white balance of
channel B, using the color
temperature. Adjust the value while
looking at the real image because
error tends to be bigger for adjustment
of high color temperature.
COLOR FINE <B> Adjusts the value more precisely if the
adjustment by WARM-COOL <B> is
not satisfactory.
P17 OFFSET WHT
OFFSET WHITE <A>: OFF
WARM COOL <A>: 3200
COLOR FINE <A>: 0
OFFSET WHITE <B>: OFF
WARM COOL <B>: 3200
COLOR FINE <B>: 0
TOP
Item Description
ASSIGN SW 1 Assigns the function to ASSIGN 1
(push-type) switch.
ASSIGN SW 2 Assigns the function to ASSIGN 2
(slide-type) switch.
ASSIGN SW 3 Assigns the function to ASSIGN 3
(push-type) switch.
ASSIGN SW 4 Assigns the function to ASSIGN 4
(push-type) switch.
U03 FUNCTION1
ASSIGN SW <1> : ATW
ASSIGN SW <2> : OFF
ASSIGN SW <3> : OFF
ASSIGN SW <4> : OFF
TURBO SW : TURBO
DF/NDF : DF
CACHE/INTVAL : OFF
TOP