Filter
Top Products
Table of
contents
Operation
Search
MENU/Settings
Search
Index
80
GB
Noise appears in the image when you view the screen in a dark place.
• The camera is attempting to increase the visibility of the screen by temporarily brightening the image
under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
• Set [Red Eye Reduction] to [Auto] or [On] (page 53).
• Shoot the subject at a distance closer than the flash range using the flash.
• Light the room and shoot the subject.
• Retouch the image using [Retouch] t [Red Eye Correction] in viewing menu (page 45), or correct
using “PMB”.
Dots appear and remain on the screen.
• This is not a malfunction. These dots are not recorded.
Cannot shoot images in succession.
• The internal memory or the memory card is full. Delete unnecessary images (page 24).
• The battery level is low. Insert new batteries or charged Nickel-Metal Hydride batteries (sold
separately).
The same image is shot several times.
• Burst mode is set to [Burst] (page 35).
Cannot play back images.
• Check that the memory card is inserted as far as it will go.
• The folder/file name has been changed on your computer.
• No guarantees are made for playing back, on this camera, files containing images which were
processed on a computer or images which were shot using other cameras.
• The camera is in USB mode. Delete the USB connection (page 72).
The date and time are not displayed.
• The screen display is set to display images only. Press the DISP (Screen Display Settings) button to
display information (page 17).
The image appears rough right after playback starts.
• This may happen due to image processing. This is not a malfunction.
Cannot display images in index mode.
• The camera is set to Easy Mode. Cancel Easy Mode.
Cannot delete an image.
• Cancel the protection (page 47).
Viewing images
Deleting