Filter
Top Products
COLOR IR CAMERACOLOR IR CAMERA User’s ManualUser’s Manual
1514
Connection
Adjust to Lens
1. Please loosen a front cover fixing screw with picture and separate cover
2. Please unlock the Zoom or Focus lever to release it.
3. Adjust the zoom or focus lever by moving it to WIDE(NEAR)or TELE(FAR)
position.
4. After adjustment, tighten the zoom or focus lever, taking care that the
adjusted position does not change.
5. Please close cover and tighten the front cover fixing screw.
Adjust to the lens's zoom and focus.
Front cover fixing screw
Focus lever
ZOOM lever
• If front cover fixing screw do not pinch, it is not waterproof.
Note
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set
and select 75Ω for the Intermediate device as shown in the picture below.
Please connect the video output terminal located on the back of the camera to
the monitor.
Connecting to Monitor
CCD Camera
CCD Camera
Intermediate End monitor
Monitor