Sony SIR-4160 Security Camera User Manual


  Open as PDF
of 19
 
COLOR CCD CAMERA User Guide
22
COLOR CCD CAMERA User Guide
23
LOW
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the Function Setup switch.
Select ‘BLC’ to adjust the area to be
enhanced then adjust the level.
HLC : Enable the user to change the level,
limit, mask color/tone and area.
•BecausetherecanbeadifferenceintheeffectivenessofHLCaccordingtotheamountof
lightareainthescreen,optimizetheinstallationangleforthebestHLCperformance.
•Whendark,theHLCisonlyactivatedwhenabrightlightexceedingaspecificsizein
NIGHTONLYmode.
•TheHLCisnotactivatedindaylightorwhenbrightlightisnotpresentatnightinNIGHT
ONLYmode.
•BLCFunctiondoesn'tworkintheB/WmodeoftheDAY/NIGHTmenu.
Notes
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function
Setup switch so that the arrow indicates ‘SSNR3’.
SSNR3
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR3. Noise is not reduced.
ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can
adjust the noise reduction level.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
Operating Your Camera
•YoucannotsettheSSNR3to‘ON’or‘OFF’whentheAGCmodeofthe
EXPOSUREmenuis‘OFF’.
•WhenadjustingthenoisereductionlevelintheSSNR3mode,rememberthat
thehigherthelevelset,themorethenoiselevelwillbereduced,aswillthe
brightnessoftheimage.
Notes
(Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced
 previous next