Filter
Top Products
Operating the Camera
Sending an Image File / Recording a Still Image in the Memory
25
Sending an Image File
You can send a captured still image by attaching it to an
e-mail, or to the FTP server.
To use this function, you need to make e-Mail (SMTP)
or FTP client active and set the address properly in the
Trigger menu of the Administrator menu (page 62).
Sending a monitor image via e-mail
1
Display the image on the monitor window.
2
Select e-Mail from the trigger drop-down list.
3
Click .
The still image of the moment you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
1
Display the image on the monitor window.
2
Select FTP from the trigger drop-down list.
3
Click .
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a Still Image
in the Memory
You can capture a camera image as a still picture and
record on in a “Memory Stick” (not supplied) or an ATA
memory card (not supplied).
To use this function, you need to insert the “Memory
Stick” or ATA memory card into the camera, make
Image memory active and set the details in the Trigger
menu of the Administrator menu (page 62).
1
Display the image on the monitor window.
2
Select Image memory from the trigger drop-down
list.
3
Click .
The still image of the moment you click is captured,
and the image file is recorded on the “Memory
Stick” or ATA memory card.