Filter
Top Products
Administrating the Camera
Sending Images to FTP Server — FTP client setting Page
31
FTP server name
Type the FTP server name to upload still images up to 64
characters, or the IP address of the FTP server.
User name
Type the user name for the FTP server.
Password
Type the password for the FTP server.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Remote path
Type the path to the destination up to 64 characters.
Image file name
Type the basic file name you want to assign to the
images when sending to the FTP server. You can use up
to 6 alphanumeric, - (hyphen) and _ (underscore) for
naming.
Suffix
Select the suffix to add to the file name.
None: No suffix is added. The basic file name is
assigned to the image to be sent to the FTP server.
Date/Time: The date/time suffix is added to the file
name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits) and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number is added to
the basic file name. A number of up to 10 digits
between 0000000000 and 4294967295 is added to
the file name.
Tip
When the Mode menu is set to Alarm, the type of alarm
and the capture timing to the alarm are added to the
suffix.
Type of alarm: S1 (Sensor), AD (Activity Detection)
Capture timing: PR (Pre-alarm), JT (Just alarm), PT
(Post-alarm)
Sequence No. clear
Click Apply to reset the Sequence number suffix to 0.
Mode
Select the mode of the FTP client function.
Manual: Sends still images to the FTP server manually.
After selecting Manual, click OK. The FTP client
function mode is set to Manual.
In this mode, when you click the (Trigger)
button on the main viewer page, a still image is
captured and sent to the FTP server. (See
“Controlling the Application Manually” on page 12.)
Alarm: Sends still images to the FTP server by
synchronizing with an external sensor input or the
built-in activity detection function. When you select
Alarm, the Alarm mode setting section appears (see
page 31).
Note
If the Suffix menu is set to None, you cannot select
the Alarm mode. When you want to use the Alarm
mode, set the Suffix menu to Date/Time or
Sequence number.
Periodical sending: Sends still images to the FTP
server periodically. When you select Periodical
sending, the Periodical sending mode setting section
appears (see page 32).
Back/OK
See “Buttons common to every setting page” on page
17.
Alarm mode setting Section
Alarm
Select the alarm to link the FTP client function. If the
selected alarm is detected, the still images before and
after the alarm are captured sequentially and sent to the
FTP server.
Sensor: External sensor connected to sensor input of the
camera I/O port
Activity detection: The activity detection function built
in the camera
To set the activity detection function, click Activity
detection. The Activity detection setting page
appears (see page 44).