Filter
Top Products
50
To skip to the next/previous
image during slide show
playback
Select
"b
/
B"
at the lower left of the
LCD screen.
You can skip to the next/previous
image by pressing the control buttons
B
/
b
while the menu bar is off.
To pause and restart the
slide show
Select [
X
]/[
B
] at the bottom left of the
screen or press the control button
z
while the menu bar is off to pause and
restart the slide show.
Note
The [INTERVAL] setting time is
approximate, and may vary depending on
the played back image size or other factors.
Viewing images on a
TV screen
Before connecting your camera, be
sure to turn off the TV.
1
Connect the A/V connecting
cable to the A/V OUT jack of
your camera and to the
audio/video input jacks of the
TV.
If your TV has stereo type audio
input jacks, connect the audio plug
of the A/V connecting cable to the
Lch jack.
2
Turn on the TV, then start
playback on your camera.
The playback image appears on
the TV screen.
Note
You cannot use a TV that has an antenna
(aerial) connector only.
to A/V OUT jack
Set the TV/VIDEO
switch to “VIDEO.”
A/V connecting cable
(supplied)