Filter
Top Products
65
Printing still images
Printing images directly using a PictBridge compliant
printer
Even if you do not have a computer, you
can print images shot using your camera by
connecting the camera directly to a
PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
In single-image mode
You can print a single image on a printing
sheet.
In index mode
You can print several images at a reduced
size on a printing sheet. You can print a set
of either the same images (1) or different
images (2).
12
• An index print function may not be provided
depending on the printer.
• The quantity of images that can be printed as an
index image differ depending on the printer.
• You cannot print movies.
• If the indicator flashes on the screen of the
camera for about five seconds (error
notification), check the connected printer.
Prepare the camera to connect it to the
printer with the USB cable.
• It is recommended to use batteries with enough
capacity or an AC Adaptor (not supplied) to
prevent the power from turning off partway
through printing.
1 Press MENU to display the menu.
2 Press B on the control button to
select (Setup).
3 Select [ ] (Setup2) with V, then
select [USB Connect] with v/V/B.
4 Select [PictBridge] with B/v , then
press z.
The USB mode is set.
Stage 1: Preparing the camera
Index button
Control Button
MENU button
2
2
1
2
1
Setup 2
Clock Set:
NTSC
File Number:
USB Connect:
PictBridge
Normal
PTP