31
E:\SONY\2659812111\01GB03BAS_E.fm
DCR-HC23E/HC24E/HC26E/HC35E
2-659-812-11(1)
Recording/Playback
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
You can locate the point where the
recording date changes.
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2 Press SEARCH M. 2 to select
[DATE SEARCH].
3 Press .(previous)/>(next)
3 to select a recording date.
Each time you press . or >, your
camcorder searches for the previous or
next date from the current point on the
tape.
To cancel the operation
Press STOP 4.
• The Date search will not function correctly
when there is a blank section between recorded
sections on the tape.
Your camcorder can search for the still
image automatically, regardless of the
recording date.
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2 Press SEARCH M. 2 to select
[PHOTO SEARCH].
3 Press .(previous)/>(next)
3 to select a photo.
Each time you press . or >, your
camcorder searches for the still image
before or after the current point on the
tape.
To cancel the operation
Press STOP 4.
• The Photo search will not function correctly if
there is a blank section between recorded
sections on the tape.
You can locate still images one after
another and display each image for 5
seconds automatically.
1 Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
Searching for a scene by date of
recording (Date search)
30min
60min
0:00:00:00
DATE
-
01
SEARCH
Searching for a still image
(Photo search)
Playing back still images in
sequence (Photo scan)
Continued ,