Sony CCD-TRV208E Camcorder User Manual


 
94
C:21:00
English
Warning indicators and messages
If indicators and messages appear on the screen or in the display window, check the following:
See the page in parentheses “( )” for more information.
Warning indicators
Self-diagnosis display (p. 93)
Moisture condensation has
occurred*
1)
Fast flashing:
– Eject the cassette, turn off your
camcorder, and leave it for
about 1 hour with the cassette
compartment open. (p. 108)
You need to eject the cassette*
1)
Slow flashing:
– The write-protect tab on the
cassette is out (red). (p. 25)
Fast flashing:
– Moisture condensation has
occurred. (p. 108)
– The tape has run out.
– The self-diagnosis display
function is activated. (p. 93)
*
1)
You hear the melody or beep sound.
*
2)
This indicator appears in the viewfinder only.
The battery pack is dead or
nearly dead
Slow flashing:
The battery pack is nearly dead.
(P. 16)
Depending on conditions, the
environment or the battery pack,
the warning indicator may flash,
even if there are 5 to 10 minutes
battery remaining.
Fast flashing:
The battery pack is dead.
The battery pack is completely
dead, and cannot be charged.
Tape/Battery pack warning
indicator*
2)
Slow flashing:
– The battery pack is nearly dead.
– The tape is near the end.
Fast flashing:
– The battery pack is dead.
– The tape has run out.*
1)
The video heads are dirty
Slow flashing:
You need to clean the heads using the Sony V8-25CLD
cleaning cassette (optional) (p. 109).
Tape warning indicator
Slow flashing:
The tape is near the end.
No tape is inserted.*
1)
The write-protect tab on the
cassette is out (red).*
1)
(p. 25)
Fast flashing:
The tape has run out.*
1)