Filter
Top Products
73
Finalizing a disc for other players
You can record on finalized DVD-RWs by unfinalizing them. This operation is valid in
VIDEO mode only. You do not have to unfinalize a VR mode disc.
Insert a finalized DVD-RW into your camcorder beforehand.
1 Press SETUP.
2 Use the multi-selector to select (DISC SET).
3 Use the multi-selector to select [UNFINALIZE].
4 Use the multi-selector to select [EXECUTE].
The confirmation display appears.
5 Use the multi-selector to select [YES].
Unfinalizing starts.
6 Press SETUP when the [COMPLETED] appears.
The message disappears from the LCD display and you can record on the disc
again.
To cancel unfinalizing
Press SETUP in any step from 2 to 4.
Notes
•Make sure that the power of your camcorder is supplied from a wall socket using the
AC adaptor.
•If you disconnect the AC adaptor while unfinalizing a disc, the disc may not be
unfinalized correctly and it cannot be used to record additional material.
•Do not apply shock or vibration to your camcorder during unfinalizing.
•You can unfinalize DVD-RWs only. You cannot unfinalize a DVD-R disc.
Tip
It takes about 20 seconds for unfinalizing.
[ SETUP ] : END
EXECUTE
EST. PROCESS TIME : 22sec
RECORDED AREA :
RETURN
UNFINALIZE
READY
[ SETUP ] : END
EXECUTE
EST. PROCESS TIME : 22sec
RECORDED AREA :
RETURN
UNFINALIZE
NO
YES
EXECUTING
AVOID ANY VIBRATION
UNFINALIZE
0:10
Recording on a finalized disc –
Unfinalizing (VIDEO mode DVD-RWs only)