Sony DCR-DVD92 Camcorder User Manual


 
18
DCR-DVD92/DVD103/DVD203/DVD403/DVD602/DVD653/DVD703/DVD803
2-587-622-12 (1)
To remove a battery pack
Slide the BATT release button in the
direction of the arrow while pressing down
the Projection in the center of the BATT
release button (), slide the battery pack
towards the back of your camcorder, then
remove the battery pack ().
BATT release
button
Projection
• When you remove the battery pack, make
sure that none of the respective lamps of
the POWER switch (p.20) is on.
When storing the battery pack
Use up the battery pack completely if
you do not intend to use it for a long time
(p.107).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
Charging time (full charge)
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack Charging time
NP-FP50*
130
NP-FP70**
160
NP-FP90
220
* Supplied with the models except for DCR-
DVD403/DVD803.
**
Supplied with DCR-DVD403/DVD803.
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
For DCR-DVD92/DVD103/DVD602/DVD653
Battery pack
Continuous
recording
time
Typical
recording
time
NP-FP50
(supplied)
80
85
90
35
40
40
NP-FP70
170
185
190
80
90
90
NP-FP90
300
335
345
145
165
170
For DCR-DVD203/DVD703
Battery pack
Continuous
recording
time
Typical
recording
time
NP-FP50
(supplied)
75
85
90
35
40
40
NP-FP70
160
180
190
70
85
90
NP-FP90
290
320
345
140
155
170
For DCR-DVD403/DVD803
Battery pack
Continuous
recording time
Typical
recording time
NP-FP50
50
55
55
20
25
25
NP-FP70
(supplied)
115
120
125
55
55
60
NP-FP90
205
220
225
100
105
110
Step 2: Charging the battery pack (continued)