Filter
Top Products
60
E:\SONY\2659811111\01US06COM.fm
DCR-HC26
2-659-811-11(1)
The computer turns off once, then starts
up again automatically (Restart). The
short-cut icons for [Picture Package
Menu] and [Picture Package destination
folder] (and “First Step Guide,” if
installed in step 10) appear on the
desktop.
14Remove the CD-ROM from the
disc drive of your computer.
• For details on connecting your camcorder and
computer, see “First Step Guide” on the
supplied CD-ROM (p. 61).
• If you have any questions about Picture
Package, contact information is listed on page
61.
1 Confirm that your camcorder is
not connected to the computer.
2 Turn on the computer.
Close all applications running on the
computer before installing the software.
3 Place the supplied CD-ROM in the
disc drive of your computer.
4 Double-click CD-ROM icon.
5 Copy “FirstStepGuide.pdf,”
stored in the desired language in
the [FirstStepGuide] folder, to
your computer.
6 Copy [IMXINST.SIT] in the [MAC]
folder of the CD-ROM to a folder
of your choice.
7 Double-click [IMXINST.SIT] in the
folder it was copied to.
8 Double-click the unzipped
[ImageMixerVCD2_Install].
9 When the user acceptance screen
is displayed, enter your name and
password.
The installation of ImageMixer VCD2
starts.
• For details on connecting your camcorder and
computer, see “First Step Guide” on the
supplied CD-ROM (p. 61).
• For details on how to use ImageMixer VCD2,
refer to software’s on-line help.
Installing on a Macintosh
computer
Installing the software and “First Step Guide” on a computer (Continued)