Filter
Top Products
189
Troubleshooting Поиск и устранение неисправностей
Types of trouble and their solutions
Others
Symptom Cause and/or Corrective Actions
• The tape has no cassette memory.
c Use a tape with cassette memory. (p. 106, 203)
• The cassette memory is full.
c Erase unnecessary title. (p. 109)
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not
visible. (p. 26)
• Nothing is recorded in that position on the tape.
c Superimpose the title to the recorded position. (p. 106)
• The tape has no cassette memory.
c Use a tape with cassette memory. (p. 112, 203)
• The cassette memory is full.
c Erase some titles. (p. 109)
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not
visible. (p. 26)
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the
VCR again. (p. 86, 88)
• The camcorder is connected to DV equipment of other
than Sony.
c Set it to IR. (p. 91)
• Setting programme on a blank portion of the tape is
attempted.
c Set the programme again on a recorded portion. (p. 99)
• The camcorder and the VCR are not synchronised.
c Adjust the synchronicity. (p. 97)
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 122)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 229)
• The batteries are dead.
c Insert new ones. (p. 229)
(Continued on the following page)
The title is not recorded.
The cassette label is not recorded.
Digital program editing does not
function.
The Remote Commander supplied
with your camcorder does not work.