Filter
Top Products
111
“Memory Stick” Operations
Recording a still image from other equipment
You can use either A/V connecting cable or i.LINK cable. Connect the devices as
illustrated on page 86.
When connecting with the A/V connecting cable, set DISPLAY in to LCD in the
menu settings. (The default setting is LCD.)
The POWER switch should be set to .
(1) Play back the recorded tape, or turn the TV on to see a desired program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) At the point where you want to record, follow the step 2 and 3 on page 110.
Note
If recording from a tape in poor condition, such as one that has been reused often for
recording, you may be unable to record still images, or the still images you do record
may be distorted.
Recording an image from tape as a still image