Sony DCR-VX1000E Camcorder User Manual


 
91
Información adicional
Additional Information
Adaptador de alimentación de CA
Carga
Utilice sólo pilas de tipo ión de litio.
Cargue la pila sobre una superficie plana sin
vibraciones.
La pila se calentará durante la carga. No
obstante, esto es normal.
Otros
Desenchufe la unidad de la toma de corriente
si no la va a utilizar durante mucho tiempo.
Para desconectar el cable, tire del enchufe;
nunca del propio cable.
No emplee la unidad con un cable dañado, si
ésta se ha caído o si está dañada.
No doble excesivamente el cable de
alimentación ni coloque ningún objeto pesado
sobre él, ya que esto lo dañará y puede
producir incendios o descargas eléctricas.
Compruebe que ningún objeto metálico entre
en contacto con los componentes de metal de
la placa de conexión. Si esto ocurre, puede
producirse un cortocircuito y la unidad puede
dañarse.
Mantenga siempre limpios los contactos
metálicos.
No desmonte la unidad.
No aplique golpes mecánicos ni deje caer la
unidad.
Mientras utilice la unidad, particularmente
durante la carga, manténgala alejada de
receptores de AM y equipos de vídeo, ya que
dificultará la recepción de AM y el
funcionamiento del vídeo.
La unidad se calienta durante su uso. Esto es
normal.
No la coloque en lugares:
– Extremadamente fríos o cálidos
– Polvorientos o sucios
– Muy húmedos
– Donde haya vibraciones
Si surge cualquier tipo de dificultad,
desenchúfela y póngase en contacto con el
proveedor Sony más próximo.
AC Power Adaptor
Charging
Use only a lithium ion type battery.
Charge the battery on a flat place without
vibration.
The battery will get hot during charging.
However, this is normal.
Others
Unplug the unit from the mains when not in
use for a long time. To disconnect the cord,
pull it out by the plug. Never pull the cord
itself.
Do not operate the unit with a damaged cord
or if the unit has been dropped or damaged.
Do not bend the mains lead forcibly, or put a
heavy object on it. This will damage the cord
and may cause a fire or an electrical shock.
Be sure that nothing metallic comes into
contact with the metal parts of the connecting
plate. If this happens, a short may occur and
the unit may be damaged.
Always keep the metal contacts clean.
Do not disassemble the unit.
Do not apply mechanical shock or drop the
unit.
While the unit is in use, particularly during
charging, keep it away from AM receivers and
video equipment because it will disturb AM
reception and video operation.
The unit becomes warm while in use. This is
normal.
Do not place the unit in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
If any difficulty should arise, unplug the unit and
contact your nearest Sony dealer.