Filter
Top Products
102
Making your own titles
To change a title you have stored
In step 3, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to
select [C], then press the dial to delete the title. The last character is erased. Enter a new
title as desired.
If you take five minutes or longer to enter characters in standby mode while a
cassette is in your camcorder, the power automatically goes off
The characters you have entered remain stored in memory. Set the POWER switch to
OFF (CHG) once and then follow the procedure from step 7 again.
We recommend setting the operation in playback or playback pause mode or removing
the cassette so that your camcorder does not automatically turn off while you are
entering title characters.
To erase a character
Turn the SEL/PUSH EXEC dial to select [ C ], then press the dial. The last character is
erased.
To enter a space
Select [
], then select the blank part.