Filter
Top Products
127
“Memory Stick” Operations
Recording an image from a mini DV tape
as a still image
Your camcorder can read moving picture data recorded on a mini DV tape and record
it as a still image on a “Memory Stick.” Your camcorder can also take in moving
picture data through the input connector and record it as a still image on a “Memory
Stick.”
Before operation
Insert a recorded mini DV tape and a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The picture recorded on the mini DV tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the mini DV tape freezes.
“CAPTURE” appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
a “Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
When the access lamp is lit or is flashing
Never shake or strike the unit. Also, do not turn the power off , eject a “Memory Stick”
or remove the battery pack. Otherwise, image data breakdown may occur.
If “
” appears on the LCD screen or in the viewfinder
The inserted “Memory Stick” is incompatible with your camcorder because its format
does not conform to that of your camcorder. Check the format of the “Memory Stick.”
If you press PHOTO lightly in the playback mode
The playback pauses momentarily.
Sound recorded on a mini DV tape
You cannot record the sound from a mini DV tape.
12
34
CAPTURE
PHOTO PHOTO
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
PLAYREW FF