Sony HVL-F32X Camera Flash User Manual


 
16-GB
Using the flash (continued)
3 Press the control button on the digital still camera to choose
“Flash mode”.
Each press of the button changes the indication in the following order.
No display (AUTO) t Forced flash ( ) t Slow synchro ( ) t No
flash ( )
* Be sure that “Hot Shoe” is set to [OFF] in the “SET UP” settings.
4 Slide the POWER switch on this unit to “ON”.
The flash starts to be charged, and the READY lamp and /CHG
lamp on the digital still camera start to flash (orange).
When the flash is ready to fire, the READY lamp on this unit lights
(orange).
When the charging is finished, the /CHG lamp on the digital still
camera goes out.
When the batteries are run down, it takes longer to charge this unit.
5 The flash mode of the digital still camera compatible with the
advanced accessory shoe can be changed in the following
order by the mode button on this unit.
/ /
mode photography
This unit performs a pre-flash, the disital still camera calculates
the ideal light intensity, and make this unit flash.