Filter
Top Products
11-GB
FLASH button
Auto-flash is set at the factory.
Each time you press the button,
the flash mode changes as
follows:
Auto-flash (no indication) n
Forced-flash n
No flash n Auto-flash
In Auto-flash mode, the flash
radiates automatically according
to the brightness of the sur-
roundings. The subject must be 1
5/8 feet to 8 1/3 feet (0.5 m to
2.5 m) away. The flash will work
at 1/60 to 1/1500 shutter speed.
When you record using the flash
and conversion lens (not
supplied), an eclipse (shadow)
may occur. To use the flash or
change the flash mode, slide
OPEN (FLASH) to lift the flash
up. (9)
FLASH/
CHARGE
lamp
Floppy disk
slot
Self-timer
Select “ ” with the control button,
then press it.
About 10 seconds after you press
the shutter button, the subject is
recorded.
Exposure
Select “ ” or “ ” on the
LCD screen with the control button,
then press it to select the desired
value.
+EV: To raise the exposure value
(brighten the picture)
–EV: To lower the exposure value
(darken the picture)
Adjustable in a range of –1.5 EV to
+1.5 EV in steps of 0.5 EV.
POWER lamp (17, 21) Hook for strap
FINDER/LCD switch
Slide to change the
viewfinder or LCD
screen.
ACCESS lamp (17, 21)
LCD screen
SPOT METER
button (47)
Press to change the
Complete photometry
or Spot light-metering
mode.
Attaching the shoulder
strap