Filter
Top Products
Advanced operations
37-GB
Adjusting the white balance
/ See page 48
Press WHITE BALANCE repeatedly to select the
desired white balance mode.
No indication : Automatic white balance (AWB) mode
∑ : One-push white balance mode
W : Outdoor mode
e : Indoor mode
Setting the ∑ (One-push white balance) button
1 Press WHITE BALANCE repeatedly to select ∑.
2 Attach the supplied white lens cap and point the
camera at a subject.
3 Press ∑.
The ∑ indicator starts to flash quickly.
Once the white balance is set, the indicator stops flashing.
Notes
•The ∑ indicator means:
Slowly flashing: white balance has not been set.
Quickly flashing: white balance is being adjusted (after you pressed ∑).
Lit steady: white balance has been set.
•If the ∑ indicator keeps flashing even when you press ∑, record in
automatic white balance mode.
•When you record with the studio-lighting, use e (indoor) mode.
•When you record under fluorescent lighting, use the automatic white
balance mode.
•If the lithium battery is installed, the setting is saved for about one hour if
you remove the power source.
•When you record with the flash, use the automatic white balance mode.