Sony SR67 Camcorder User Manual


 
91
Table of Contents Useful Recording Techniques Index
(Warning indicator pertaining to
camera-shake warning)
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to drop
sensor)
The drop sensor function (p. 77) is activated,
and has detected that the camcorder has been
dropped. Therefore, the camcorder is taking
steps to protect the hard disk. Recording/
playback may be disabled as a result.
The drop sensor function does not guarantee
the protection of the hard disk under all
possible situations. Use the camcorder under
stable conditions.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Tips
You may hear a melody when some warning
indicators appear on the screen.
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
HDD format error.
The internal hard disk of the camcorder
is set differently from the default format.
Performing [MEDIA FORMAT] (p
. 62) may
enable you to use your camcorder. This will
delete all data in the internal hard disk.
Data error.
An error occurred during reading or writing
the internal hard disk of the camcorder. This
may occur when you keep applying shock on
the camcorder.
The Image Database File is damaged. Do
you want to create a new file?
The image management file is damaged. When
you touch [YES], a new image management
file is created. The old recorded images on the
media cannot be played back (Image files are
not damaged). If you execute [REPAIR IMG.
DB F.] after creating new information, playing
back the old recorded images may become
possible. If it does not work, copy the image
using the supplied software.
Inconsistencies found in Image Database
File. Do you want to repair the Image
Database File?
The Image Database File is damaged. Do
you want to repair the Image Database
File?
The image management file is damaged, and
you cannot record movies or photos. Touch
[YES] to repair.
You can record photos on “Memory Stick PRO
Duo” media.
Buffer overflow
You cannot record because the drop sensor
senses a drop of the camcorder repeatedly.
If you are at risk of dropping the camcorder
constantly, set [DROP SENSOR] to [OFF],
and you may be able to record the image again
(p
. 77).
Recovering data.
Your camcorder tries to recover data
automatically if the data writing was not
performed properly.
Cannot recover data.
Writing data onto the recording media of the
camcorder has failed. Attempts were made to
recover the data, but they were unsuccessful.