Filter
Top Products
196
6 Turn the POWER switch to OFF (CHG) on your camcorder, and then
disconnect the USB cable.
7 Restart your computer.
Step 2: Install the USB driver on the supplied CD-ROM
Perform the entire procedure described in “Installing the USB driver” on page 189.
Viewing images recorded on a “Memory Stick”
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows to load.
2 Insert a “Memory Stick” into your camcorder.
3 Connect the AC Adaptor, and set the POWER switch to MEMORY.
4 Connect the
(USB) jack on your camcorder to the USB connector on your
computer using the supplied USB cable.
5 Open your computer’s “Device Manager.”
Windows XP:
Select “Start” t “Control Panel” t “System” t “Hardware” tab and click
the “Device Manager” button.
If there is no “System” inside “Pick a category” after clicking “Control Panel,”
click “Switch to classic view” instead.
Windows 2000:
Select “My Computer” t “Control Panel” t “System” t “Hardware” tab,
and click the “Device Manager” button.
Other OS:
Select “My Computer” t “Control Panel” t “System,” and click “Device
Manager.”
6 Select “Other devices.”
Select the device prefixed with the “?” mark and delete.
Ex: (?)Sony Handycam
7 Turn the POWER switch to OFF (CHG) on your camcorder, and then
disconnect the USB cable.
8 Restart your computer.
Step 2: Install the USB driver on the supplied CD-ROM
Perform the entire procedure described in “Installing the USB driver” on page 189.
Connecting your camcorder to your computer using the USB cable