Filter
Top Products
89
Advanced Playback Operations
Your camcorder automatically searches for the scene having a tape counter value of
“0:00:00. ”
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY when the tape counter is not displayed
on the screen.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows “0:00:00,” then starts counting.
The ZERO SET MEMORY indicator flashes on the screen.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter’s zero point. The tape stops
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears, and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
•The zero set memory does not work with tapes recorded in the Hi8 /
standard 8 mm system.
•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
is canceled.
•There may be a discrepancy of several seconds between the time code and the tape
counter.
If a tape has a blank portion between recorded portions
The zero set memory may not work correctly.
The zero set memory also in the standby mode
When you insert a scene in the middle of a recorded tape, press ZERO SET MEMORY at
the point you want to end the insertion. Rewind the tape to the insert start point, and
start recording. Recording stops automatically at the tape counter zero point. Your
camcorder returns to the standby mode.
Quickly locating a scene
– ZERO SET MEMORY
ZERO SET MEMORYDISPLAY
m
x
N