If you have trouble operating your camera refer to the following
TROUBLESHOOTING
If
you
have
trouble
operating
your
camera
,
refer
to
the
following
Problem Solution
Nothing appears on
the screen.
● Check that the power cord and line connection
between the camera and monitor are correct
● Check that
y
ou have
p
ro
p
erl
y
connected VIDEO
yppy
cable to the camera VIDEO output jack.
The image on the
screen is dim.
● Is the lens stained with dirt? Clean your lens with
soft clean cloth.
● Set the monitor for the proper conditions.
● If the camera is exposed to too strong light
change the camera position.
●
Adjust the lens
’
focus
●
Adjust
the
lens
focus
.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor.
● If you have an intermediate device, set the
75Ω/Hi-z properly.
The camera is not
working properly,
and
ff
● Check that you have properly connected
the camera to an appropriate power source.
the sur
f
ace o
f
the
camera is hot.
MOTION DETECTION
function is not active.
● Have you set ‘MOTION DET.’ menu to off?
● Have you set ‘MD LEVEL’ to too low?
● Have you set ‘MD AREA’ properly
13