Filter
Top Products
Troubleshooting
35
36
●Have you set ‘MOTION DET.’ menu to off?
●Have you set ‘MD LEVEL’ to too low?
●Have you set ‘MD ARAEA’ properly
MOTION DETECTION
function is not active.
●Check that you have properly connected
the camera to an appropriate power source.
The camera is not
working properly.
●Adjust the contrast feature of the monitor.
●If you have an intermediate device, set the
75Ω/Hi-z properly.
The image on the
screen is dark.
●Is lens stained with dirt? Clean your lens with a soft,
clean cloth.
●Set the monitor for the proper condition.
●If the camera is exposed to too strong light
change the camera position.
●Adjust the lens’ focus properly.
The image on the
screen is dim.
●Check that the power cord and line connection
between the camera and monitor are proper.
●Check that you have properly connected VIDEO
cable the camera VIDEO output jack.
Nothing appears on
the screen.
SolutionProblem
●Have you connected your camera to DC power
source? Connect it to an AC power source.
L/L mode cannot
be selected.
●Is the camera facing to direct sunlight or
fluorescent lighting? Change the camera position.
The image on the
screen flickers.
●Check that you have properly set the ‘WHITE
BALANCE’ menu
The color of the
picture is not
matched.
Solution
Problem
If you have trouble operating your camera, refer to the following.