Operating your camera - BACKLIGHT
3) SLC (Speco Light Compensation) - BACKLIGHT
A built-in SR chip provides intelligent light level control to overcome
severe Backlight conditions.
① Press the SET button to display the SETUP menu and move the
arrow indicator to ‘SLC’ using the UP or DOWN button.
② SET ‘SLC’ to the desired mode using the LEFT or RIGHT buttons.
4) AUTO GAIN (AGC)
AGC allows a brighter picture in low light conditions. Higher GAIN level
will yield a brighter screen but you might notice an increase in noise.
① Press the SET button to display the SETUP menu and move the arrow
indicator to ‘AGC’ using the UP or DOWN button.
② SET ‘AUTO GAIN’ to the desired mode using the LEFT or RIGHT button.
▶OFF ▶LOW ▶MIDDLE ▶HIGH
▶LOW ▶MIDDLE ▶HIGH
▶OFF
19 20