1. 4 Channel Switcher Box x 1 set
2. Remote Control x 1 pc
3. Color Camera With Mounting bracket x 4 pcs
4. 60ft Cable x 4 pcs
5. Video Cable x 1 pc
6. 12V DC Adaptor for the Switcher x 1 pc
Parts of the Camera
A. Mounting bracket
B. IR LED
C. Camera Din Connector
D. Camera Lens
A. Camera Installation
1. Install or mount the camera at the desired
location. Do not place camera in a location
subject to direct sunlight or bright light.
2. The coaxial cable supplied has one end
with a DIN connector (Male) and the
opposite end with a DIN connector (Female).
Slowly insert the DIN plug into the back of
the camera being careful to align the DIN
plug correctly.
3. The camera body could be adjusted up and down by
loosening screw A and tightening up at desired angle B.
4. The camera body could be rotated
around the mounting bracket D. by adjusting screw C for any direction (360 degree).
Parts Included with This System
Parts of the System
Installation and Adjustment
