Filter
Top Products
A. System setup:
y Date / Time: Press to move the cursor to the
desired section wish to adjust. Press to
adjust the section.
y System Format: Choose PAL / NTSC
y Key lock: To enable / disable button on the system box.
y Factory reset: To reset to factory default setting.
y To exit, press MENU button again.
B. Display setup:
y Display on screen: To display title / date / time on the
screen by check the box beside. To disable by
un-checking the box.
y Screen position: To adjust camera viewing area by
adjusting X (horizontal) and Y (vertical). Border color:
To change the color or camera's border.
To exit, press MENU button again.
C. Auto sequence:
y To enable or disable auto sequence function.
Each channel can be set to ON or OFF
respectively. And the switching time can be
set from 1sec to 99sec..
y To exit, press MENU button again.
D. Camera setup:
y Camera 1: Press to switch desired
camera.
y Title: Press to move the cursor,
and press to adjust character.
y Press to adjust Brightness, Contrast,
Saturation, Hue and Sharpness.
y To exit, press MENU button again.