Filter
Top Products
WebCAM user manual -10-
Chapter 4: Using Utility to Setup IP & Update Firmware
WARNING:
Do not lose your passwords (as attached on the WebCAM unit and freeware
CD). It is required every time you “reset” your WebCAM either thru “About”
section of the webpage, or via the manual reset button. If you lose these
passwords, you’ll have to contact your reseller for the master password.
3. Once you have entered the necessary information for “Input Device Password”
and “Administrator authentication”, “Setup Wizard” will initiate to take you through
the installation.
4. Enter the necessary camera configurations. Choose the appropriate frequency
(Indoor 60 Hz, Indoor 50 Hz or Outdoor) to prevent flickering on the video feed.
Enter a name for the camera in the “Location” box to easily identify it.
5. Click “Next >” to configure the Network Connection.