Filter
Top Products
www.svat.com
GENERAL SETUP
1. Connect the power jack of adapter
(DC 8V) to camera.
2. Turn on the monitor. Make sure that the
active channel on the monitor is the
same that is on the camera. Wait for
the LCD screen to display images.
3. Adjust the volume control to preferred
setting.
BATTERY INSTALL
4. The monitor should be turned off. Open
the battery compartment in the back of
the monitor. Install the rechargeable ion
lithium battery for portability purposes.
AC POWERED/RECHARGING
5. You can connect the adapter (DC +5V)
to power on receiver and charge up
the battery at the same time. The
indicator will light while charging and
turn off when the charging is complete.
MONITOR TO VIDEO FUNCTION
6. The monitor has one video output
which can be used to connect to a
VCR for recording. Connect the video
output wire to the output on the
monitor. Connect the yellow RCA end
of the wire to your VCR’s yellow input
connection.
NOTE: In order to view and record the images from the
WSE300, you must have the VCR on it’s input channel (not
channel 3). Other names for the input channel are line
1/2, AV channel, TV/Video channel and AUX channel.
1
2
3
4
5
6