Swann BulletCam Security Camera User Manual


 
2 7
The bulletcam camera is designed for use with any TV, VCR, Security Monitor or computer with a
video capture card. The camera has a sealed casing and can be used indoors or in a sheltered
position outdoors. The bulletcam camera can be used for a variety of purposes including
monitoring callers at the door, keeping your car, yard, shop or warehouse under observation or
used as a camera to monitor your baby.
1. Camera with Stand and 10m/30ft cable
2. 9Volt DC 300mA Power Adaptor (adaptor design varies depending on country)
1
2
Installation Instructions
Contents and Parts Identification
1. Doorways
5. Reception
Areas
6. Cash Register
7. Mix Dummies
& Real Cameras
8. Under Eaves
2. Windows
3. Car Parks
4. Verandahs
Where to put cameras:
Position cameras in the areas most at risk:
Tips for locating your camera
Where to Place The Security Stickers:
1. On your front window
2. On side windows
3. Near entrance points - doors, gates
4. Next to a dummy camera mounted outside
5. On the front counter
6. On the cash register
7. Next to an obvious camera
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation.