Filter
Top Products
7.Search Play
TIME SEARCH:
EVENT SEARCH:
START STOP SEARCH:
UP DOWN ENTER
SEARCH
8. Time Search
Time Search ENTER Time Search
LEFT RIGHT
ENTER SEARCH
Search Play
START:
END:
Push the Search button to display the Search Play window on the screen.
search recording by the time you enter.
search recording by event list.
search recording by start and stop segments.
Push the or button to move the cursor, then push the button to enter the sub
menu you have highlighted. Push the button again to quit the search menu.
Move the cursor to , then push the button and the window will
appear, as illustrated as below.
Push the or button to move the cursor, push and button to modify the time, then
push the button to start play from the time you selected. Push the button again to
return to the menu.
If the time you enter doesn’t match recorded video, the DVR will automatically play the video
closest to the time you enter.
the first time you record.
the end time of the last recording, you must enter a time between start and end. If the HDD
has been overwritten, the start time may not be correct.
+-
9. Password Reset
10. Changing the On Screen Display (OSD) language
Press the “pause” button 12 times on the front panel and it will reset the DVR's password to
the factory default password of (0000).
You can change the OSD language from the default English to French or Spanish by following
the steps below.
To change the OSD language, enter the menu system by pressing the MENU button on the
front of the DVR and correctly input your password.
Highlight the “SYSTEM SET” option, and press the ENTER button.
Select “MENU LANGUAGE” and press the ENTER button.
Push the ADD or DEC buttons to change the language and press the ENTER button to select
your language.
Now fully exit the menu system and restart your DVR.
If is disabled the system will not start recording on alarm. Setting schedule on
or off is achieved through pushing the button on the front panel or remote, but not
through the System Setup menu and window. When the unit is in active, the
character “ ” will display on the screen. Alarm video recording can’t be stopped by pushing the
or button while is active. To ensure that once is
set to on that the schedule cannot be accidentally stopped there is a password protection to stop
. You must press the button then enter the correct password to turn
off.
Check setup before recording; confirm the video quality and the frame rate, as
the record setting can’t be changed during the recording process.
As long as the alarm input signal is correctly set the alarm recording will continue during the period
of time set up by , and when the outside the time period the alarm recording
automatically stops.
Time recording starts and stops recording automatically according to the pre-arranged time period.
It is applied to a fixed timetable, for example business hours time recording (or outside business
hours time recording) with fixed start/stop time.
To start the function you must have a record schedule setup beforehand. When
this is done, push the button on the front panel to set schedule mode to on and the
schedule symbol “ ” will display on the screen. The mode will not work unless
you activate .
To make mode active the system must be set to active and that
period is set to “ ” in setup.
In Time Record mode, you must push the button then enter the password to stop
time recording.
Because Time recording is reliant on the system being set with the correct time, you must adjust the
time to your correct local time before using this function.
Push the button and the system will begin to play the images recorded from the start of the
most current recording.
If the recording is playing, push the button to pause playing, push the button again to
resume normal play.
To use playing or playing, push the or button while
the recording is playing to see faster playback. Push the button to return to normal speed
playing from the current place.
Continuous pushing of the button will change the fast-forward between five levels of
speed ( , , , , ) in sequence. Continuously pushing the button will change the
fast backward playback between four levels of speed ( , , , ) in sequence.
During playback mode, press the button to play a frame at a time, and hold
the button in to continually play one frame at time while the button is held.
During playback mode, press the button to play back a frame at a time, and
hold the button in to continually play one frame at time while the button is held.
Push the button again to resume normal playback speed, or push the button to stop
playing.
Schedule mode
SCHEDULE
Schedule Mode
S
RECORD STOP Schedule Mode Schedule Mode
Schedule Mode SCHEDULE
Schedule Mode
Alarm Recording
A/M REC TIME
5.Time Recording
Time Recording
SCHEDULE
S Time Recording
Schedule Mode
Time Recording Schedule Mode
T Record Schedule
SCHEDULE
6.Playback
PLAY
PAUSE PLAY
Fast Forward Fast Backward FORWARD REW
PLAY
FORWARD
X2 X4 X8 X16 X32 REW
X2 X4 X8 X16
Single Frame Forward
Single Frame Rewind
PLAY STOP
4
5
Basic Operation (continued) Basic Operation (continued)