Filter
Top Products
Introduction
Your Night Hawk Camera Pack comes with
Setting up your system
Camera Features
Receiver Features
Changing the channel on the Night Hawk Camera
Important Information about this product
Troubleshooting, Hints & Tips
Warranty Information
Technical Specifications
Help Desk / Support Details
2
2
3
4
4
5
5
6
7
7
Back Cover
2
2
3
4
4
5
5
6
7
7
Back Cover
The Swann Night Hawk Camera Pack incorporates the latest in advanced technology. We feel
confident that you will be pleased with the quality and features of this product.
The Swann allows you to transmit pictures and sound with ease. As the
radio waves it uses have a frequency of 2.4GHz, they can be received within a radius of up to
The Night Hawk Camera Pack comes with 2 cameras so that you
have the option of using different frequencies for different locations and conditions to ensure that
you have the best possible image quality for your situation.
Night Hawk Camera Pack
328ft/100 m in open line of sight.
Please note: The Swann Night Hawk broadcasts video in the public domain. The video signal
is not encrypted and could potentially be viewed by anyone with a similar 2.4GHz receiver
unit. Please keep this in mind when positioning and using any wireless camera equipment.
INSTALLATION
• 2 x Night Hawk Color Cameras with built in 2.4GHz Transmitter with Stand
• 1 x Night Hawk 4 channel 2.4GHz Receiver
• 2 x Mains Power Adaptor (8V for use with Night Hawk Camera)
• 1 x Mains Power Adaptor (12V for use with Night Hawk Receiver)
• 2 x Battery Snap Adaptor (For use with Night Hawk Camera, 9V batteries not included)
• Remote Control for receiver
• RCA A/V Cable
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Night Hawk 2.4GHz Transmitter
4 Channels in 2.4 Ghz frequency band*
FCC,
/ ”x / ”x1” (22x22x25mm)
¾oz 20 grams
32° - 122°F 0° - 50°C
77
88
Available Channels:
RF Output Power: CE and C-tick compliant
Operating Power: 8V DC
Power Consumption: 100mA
Size:
Antenna: Omni-directional
Transmitting Range: Up to 328ft ~ 100M line of sight
Weight: ~
Operating Temperature: ( )
Night Hawk CMOS Colour Camera
Horizontal
Video System: PAL 50Hz (Australia, UK/Europe),
NTSC 60Hz (USA and Canada)
Automatic Exposure / Gain / White balance/IR LED activation
Sensor: 1/3”(8.5mm) Colour CMOS
Auto Electronic Exposure: 1/60 - 1/15000 sec.
Minimum Illumination: 1.5 Lux @ f1.2 LEDs inactive
0 Lux @ f1.2 LEDs active
Signal to Noise Ratio: >48dB
Board Lens: / ” ~ 5.6mm
View Angle: 60 degrees
Size: / x / ” ~16mm x 18mm, board lens
Resolution: 380 TV lines
7
523
32
832
Night Hawk 2.4GHz Receiver
6”x3½”x1 / ”
150 x 88 x 40mm
2414MHz), Channel 2 (2432MHz), Channel 3 (2450MHz) and Channel 4 (2468MHz)
5
8
Frequency: 4 Channels in 2.4 Ghz frequency band*
Video input/output: 1V p - p / 75 ohm
Audio input / output: 0.8V / 600 ohm
Antenna: 60 degree directional
Audio Bandwidth: 50 - 17000 Hz
Operating Power: 12V DC
Power Consumption: 180mA
*The Night Hawk Camera Pack uses the following frequencies for the 4 channels:
Channel 1 ( .
Size:
Technical Specifications
7
Contents
Contents
This Package Comes With ...
2
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation