Filter
Top Products
LENS HOOD
*Attaching the lens hood when the FEC is not attached
1. Align the attaching mark on the hood and the hood attaching mark on the
lens, then mount the hood evenly.
2. Turn the hood (approx 90 deg.) until the hood attachment mark "TAMRON
O" and the hood attachment mark on the lens lines up and you hear a click
when the hood is fixed.
* Removing when the FEC adapter is not attached
1. Firmly turn the hood in a counterclockwise direction until you hear a click
to release it.
2. Then turn the hood attaching alignment to remove it.
* Attaching the lens hood when the FEC adapter is attached
1. Hold the FEC ring firmly with one hand so it does not turn.
2. Line up the hood attaching alignment mark on the hood and the hood
attachment mark on the FEC, then mount the hood evenly.
3. Turn the hood until the hood attachment mark "TAMRON O" and the hood
attaching alignment mark on the FEC lines up and you hear a click when the
hood is fixed.
* Removing the lens hood when the FEC adapter is attached
1. Hold the FEC ring firmly with one hand so that it does not turn.
2. Firmly turn the hood in a counterclockwise direction until you hear a click
to release it.
3. Then turn the hood to remove it.
* Stowing the lens hood
You can reverse and attach the lens hood when it is stowed.
1. Reverse the hood and align the hood attachment mark "TAMRON O" with
the hood attaching alignment mark on the lens and mount it.
2. Rotate the hood clockwise, the hood is difficult to pull off towards the front
(because of the construction, the hood will not be fixed when attached
backwards.)
* The hood for the A08 does not lock when it is reversed due to constructional
configuration.When carrying the lens, be sure to hold the lens firmly. If you carry
it by the hood portion only, the hood may come off the lens causing it to fall. Do
not do this as it may cause bodily harm or substantial damage to the lens.