Filter
Top Products
TRIPOD SOCKET (Continued)
* Removing the tripod socket
1. Turn the tripod socket fixing screw in the counterclockwise direction and
line up the white mark on the top of the knob with the tripod mount mark.
2. Pull the tripod socket fixing screw outward to open the tripod mount ring
and then remove the tripod socket.
* Attaching the tripod socket
1. Open the tripod mount ring and set it to the lens.
2. Make sure that the white mark on the top of the tripod socket fixing screw
and the tripod mount mark are aligned, and then pull the knob outward.
3. Close the tripod mount ring, and tighten the tripod socket fixing screw in a
clockwise direction.
* Hold the camera firmly when removing the tripod socket so you do not drop
the camera or the lens.
* Make sure that the white mark on the top of the knob and the indicator on
the tripod socket are aligned before you pull on the tripod fixing screw.
DEPTH OF FIELD
With a camera equipped with a depth of field preview button or a aperture stop
down mechanism, the depth of field can be directly observed through the
viewfinder screen of your camera.
**The optical design for this lens takes into consideration the various features of
digital single reflex cameras. However, due to the configuration of the digital
single reflex cameras, even when the autofocus accuracy is within specifications,
the focal point may be a little forward or behind the optimum point when
shooting with autofocus under some conditions.
PRECAUTIONS IN SHOOTING
* The Tamron lens, SP AF200-500mm (Model A08) employs an internal focusing
[IF] system to achieve a remarkable minimum object distance of 2.5 meters
(8.20 feet). Because of the characteristics of this optical design, the angles of
view at distances other than infinity are wider than that of the lenses applying
an ordinary focusing system.