Filter
Top Products
EXPOSURE RRATE
When the lens is moved outwards to increase the magnifications ratio for shooting close-
ups, the actual brightness on the film decreases, and the effective F number changes. For
auto exposure photographing, using an external exposure meter, or when using and exter-
nal light-adjusting flash however, the exposure must be corrected for this decrease in
brightness according to the magnification ratio. For the amount of the correction, refer to
table 12.
DEPTH-OOF-FFIELD
With a camera equipped with a depth-of-field preview button or an aperture-stop-down
mechanism, the depth of field can be directly observed through the viewfinder screen of
your camera. For the operational details, read the instruction manual of your camera.
INFRARED PPHOTOGRAPHY
Please be aware that there is no infrared index line on any models listed in this owner's
manual. Therefore practically no black-and-white infrared film can be used with these
lenses.
PRECAUTIONS IIN SSHOOTING
Do not use the lens hood when using the camera's built-in flash. Also, when shooting close-
ups, the lens unit may obstruct the light of the flash even when not using the lens hood,
resulting in vignetting at the bottom part of the image. Thus, we recommend using a special
externally mounted flash or flash photography.
Also refer to the section of your camera's instruction manual pertaining to the use of the
built-in flash.
When using a B01 with a tele-converter, use the manual focus. When a tele-convert-
er is used with the macro lens, the autofocus may not operate correctly, depending on the
focusing distance. This is due to the camera's mechanical system. Use a Tamron tele-con-
verter with a Tamron lens or best results. Tele-converters produced by other manufacturers
may not mount properly and/or cause malfunctions. When a tele-converter is mounted
onto a lens, the focusing ring normally feels heavier when rotating.
When using the lens in macro range, it may be necessary to use a tripod to avoid
camera shake. Using high-speed film (ISO 400 or faster) with a fast shutter speed is also
helpful to reduce the influence of camera shake.
Do not forcibly turn the focusing ring when camera and/or lens is/are set in the AF
mode. Doing so could damage the lens and/or camera.
Certain camera models may indicate the maximum aperture values of the lens as
approximate numbers. This is inherent to the design of the camera and not an indication of
error.