Filter
Top Products
30
TANDBERG 1000/550 for Cisco
CallManagerAdvanced Use
Data Port Settings
The system provides one standard RS232 serial port to allow a computer to be connected for data transfer and
control purposes.
WHEN CONNECTING TO A PC THE CONNECTING CABLE MUST BE A STRAIGHT THROUGH RS232 CABLE.
If you wish to connect a PC to the Dataport, you must ensure that the PC and the system are identically
configured. The available settings are:
TIP
Whitebalance
To manually adjust the whitebalance select Manual and use the arrow keys to adjust. Select Auto to have
automatic whitebalance adjustment.
Messages
If there is a new message waiting to be played back, you can acces this using the Messages menu. If no
messages are waiting, there will be no response activating this menu.
THE SYMBOL ON THE LEFT INDICATES THAT THERE ARE NEW MESSAGES PENDING.
TIP