Filter
Top Products
Auto Run
This setting selects the display which comes on when the DPF is
switched on or brought out of Standby, Photo is the default. .
Press
or to select Auto Run. Press
Press or to select the item. Press OK to conrm and return.
Power On and Power O.
These parameters are set in the same manner. If you wish the frame to
switch on or o at a certain time you can set this up. The On/O times
can be set to operate independently or together.
Press
or to select Power on/Power o. Press
Press the keys to cycle Hour, Min and Frequency.
Press or to change the values.
You can set the On/O time to operate once only, or daily.
The default is OFF.
If you set a Power ON time the frame wiill “Wake up” at the appointed
time and then display the “Auto Run” option which you have selected.
Press OK to conrm and return.
Default
This setting returns the DPF to factory settings.
Press
or to select Default. Press
Press or to toggle YES/NO. Press OK to conifrm
If you select NO: you will be returned to the General Setup Screen.
If you select YES: the screen will momentarily blank. The DPF will
then switch on and the language sel;ection screen will appear. Refer
to Page 8.
Page 17
Language Photo
Brightness MainMenu
Contrast Clock
Saturation Calendar
Auto run
Power on
General Setup
Contrast Photo
Saturation MainMenu
Auto run Clock
Power on Calendar
Power off
Default
General Setup
(hh:mm)
Off
09 58
Contrast YES
NO
Saturation
Auto run
Power on
Power off
Default
General Setup