Filter
Top Products
27
5.13 Setting the date and time
Your digital camera can save the date and time each photo was taken and display this
information in playback mode.
However, you must first set the date and the time for the camera.
1
Press the button to activate the configuration menu.
2
Select the “Date&Time” item in the menu and press OK to confirm.
3
Now change the time setting. Select the
setting required using the control buttons
and , and then change the value
using the
and control buttons.
Press OK to confirm the values after you
have finished making the settings.
The date and time can only be displayed by the camera in playback
mode. They cannot be printed.
The time settings are saved by an internal backup battery. Therefore, the
time settings are not lost when the two replaceable AAA batteries are
removed. The settings are not lost until the internal backup battery is flat.